SUMITUBE™ F (Z)-MJHT001-002

admin — Sat, 04 Feb 2023 06:29:15 +0000

SUMITUBE F (Z)

[105℃ rating, flame-retarded heat-shrinkable tubing]
UL recognized

Basic Properties

Category	Heat shrink tubing
Material	Irradiated cross-linked flexible flame-retarded polyolefin
Flammability	Flame Retarded
Shrink temperature	min. 90℃
Shrink ratio	min. 50%
Longitudinal change	min. -15%
Continuous operating temperature	-55 to 105℃
Specifications/Approvals	UL224 File No. E48762 Catalog No. SUMITUBE F (Z) or 939 Rating temperature: 105℃ Rating voltage: 600V Flammability: VW-1 Electrical Appliance and Material Safety Law (Japan) Flammability rating (-F-) test registration No.: F-STS3-009 – F-STS3-012
Marking on Surface	Made in Japan: VW-1 -F- SUMITOMO-K SUMITUBE F (Z) CAT 939 105℃ Made in China: VW-1 -F- SUMITOMO-SZ SUMITUBE F (Z) CAT 939 105℃
Available colors	Black, Brown, Red, Orange, Yellow, Green, Blue, Purple, Gray, White
Flexibility	Flexible
Environmental Compliance	RoHS,ELV
Industry	Construction machinery,Industrial machinery,Electronics

Oil/Chemical resistance (room temperature)

Gasoline	Gas oil	Lubricant	Alcohol	Acid	Alkali
△	△	△	◎	○	○

◎：Very good　○：Good　△：Not applicable in some cases

Features

Properties	Items	Requirements	Typical values*
Mechanical	Tensile strength (before aging) Tensile strength (after aging) Elongation (before aging) Elongation (after aging) Heat shock Cold bend	min. 10.4MPa 136℃ x 7 days, min. 7.3MPa min. 200% 136℃ x 7 days, min. 100% 180℃ x 4 hours, no crack -30℃ x 1 hour, no crack	12.6MPa 14.8MPa 333% 358% Pass Pass
Electrical	Dielectric withstand (before aging) Dielectric withstand (after aging) Dielectric breakdown (before aging) Dielectric breakdown (after aging) Volume resistivity	AC2.5kV x 60 sec., no breakdown 136℃ x 7 days, AC2.5kV x 60 sec., no breakdown min. AC2.5kV 136℃ x 7 days, min. 50% of original and min. AC2.5kV min. 1.0 x 10¹⁴Ω・cm	Pass Pass 21.0kV Pass 2.7 x 10¹⁶Ω・cm
Chemical	Corrosion against bare copper Stability against copper Flammability	136℃ x 7 days, no corrosion after leaving under 95% humidity, 23℃ x 24 hours 136℃ x 7 days, elongation min. 100% after leaving under 95% humidity, 23℃ x 24 hours Flame-retarded, pass VW-1	Pass358% Pass

Properties

Items

Requirements

Typical values*

Mechanical

Tensile strength (before aging)
Tensile strength (after aging)
Elongation (before aging)
Elongation (after aging)
Heat shock
Cold bend

min. 10.4MPa
136℃ x 7 days, min. 7.3MPa
min. 200%
136℃ x 7 days, min. 100%
180℃ x 4 hours, no crack
-30℃ x 1 hour, no crack

12.6MPa
14.8MPa
333%
358%
Pass
Pass

Electrical

Dielectric withstand (before aging)
Dielectric withstand (after aging)
Dielectric breakdown (before aging)
Dielectric breakdown (after aging)
Volume resistivity

AC2.5kV x 60 sec., no breakdown
136℃ x 7 days, AC2.5kV x 60 sec., no breakdown
min. AC2.5kV
136℃ x 7 days, min. 50% of original and min. AC2.5kV
min. 1.0 x 10¹⁴Ω・cm

Pass
Pass
21.0kV
Pass
2.7 x 10¹⁶Ω・cm

Chemical

Corrosion against bare copper

Stability against copper

Flammability

136℃ x 7 days, no corrosion after leaving
under 95% humidity, 23℃ x 24 hours
136℃ x 7 days, elongation min. 100%
after leaving under 95% humidity, 23℃ x 24 hours
Flame-retarded, pass VW-1

Pass358%
Pass

* For reference use only

Sizes

Trade size（mm）	As supplied（mm）		After recovered（mm）		Unit length（min.）（m）
Trade size（mm）	Inside diameter	Wall thickness（nom.）	Inside diameter（max.）	Wall thickness（min.）	Cut	Spool
1×0.2	1.30±0.30	0.20	0.50	0.33	1	200
1.5×0.2	2.00±0.30	0.20	0.75	0.36	1	200
2×0.2	2.50±0.30	0.20	1.00	0.44	1	200
2.5×0.25	3.00±0.30	0.25	1.25	0.44	1	200
3×0.25	3.50±0.30	0.25	1.50	0.44	1	200
3.5×0.25	4.00±0.30	0.25	1.75	0.44	1	200
4×0.25	4.50±0.30	0.25	2.00	0.44	1	200
5×0.25	5.40±0.30	0.25	2.50	0.56	1	100
6×0.25	6.4±0.4	0.25	3.00	0.56	1	100
7×0.25	7.4±0.4	0.25	3.50	0.56	1	50
8×0.25	8.4±0.4	0.25	4.00	0.56	1	50
9×0.25	9.4±0.4	0.25	4.50	0.56	1	50
10×0.25	10.4±0.4	0.25	5.00	0.56	1	50
11×0.25	11.4±0.4	0.25	5.50	0.56	1	50
12×0.25	12.4±0.4	0.25	6.00	0.56	1	50
13×0.3	13.4±0.4	0.30	6.5	0.69	1	50
14×0.3	14.5±0.4	0.30	7.0	0.69	1	50
15×0.3	15.5±0.4	0.30	7.5	0.69	1	50
16×0.3	16.8±0.5	0.30	8.0	0.69	1	50
18×0.35	18.7±0.5	0.35	9.0	0.77	1	50
20×0.35	21.2±0.6	0.35	10.0	0.77	1	50
22×0.4	23.2±0.6	0.40	11.0	0.77	1	50
25×0.4	26.1±0.8	0.40	12.5	0.87	1	50
30×0.5	32.0±1.0	0.50	15.0	0.87	1	50
40×0.5	43.0±1.5	0.50	20.0	0.97	1	50
50×0.5	53.0±2.0	0.50	25.0	0.97	1	50

The post SUMITUBE™ F (Z)-MJHT001-002 appeared first on บริษัท ชูเซอิ (ประเทศไทย) จำกัด - ผลิตชุดสายไฟ Wire Harness.

Sumitube - บริษัท ชูเซอิ (ประเทศไทย) จำกัด - ผลิตชุดสายไฟ Wire Harness